Note: The following functions need to used with the YN-622C transceiver (SKU: D886).
It transmits all the settings in External Flash Menu of your camera to remote flash(es), you can control flash(es) through camera menu.
It supports TTL function.
LCD screen display, multi-buttons quick operation.
The firmware can be upgraded through the USB interface.
Support wireless shutter release function.
The focal length(zoom)of the A/B/C three groups of flash can be adjusted separately.
Equipped with the AF focus assist light (can be disabled).
Grouping flash mode: E-TTL/Manual flash/Super sync.
Supporting mixed use of the A/B/C three groups of flashes with E-TTL, Manual flash, or Super sync flash mode.
The exposure compensation or flash output of A/B/C three groups of flashes can be adjusted separately.
Shutter Sync: first curtain sync, second curtain sync and FP high-speed sync, the highest sync speed is 1/8000s.
Support exposure compensation, flash value lock function(FVL).
Support simulate (modeling) flash, red-eye reduction flash.
Support the flash zooming (auto).
Super Sync (SS) time delay adjustment, for higher x-sync speed than the camera allows.
Settings saved automatically.
The flash sync signal can be input through the PC port.
Support the basic flash trigger (max sync speed is 1/250s) of standard hot shoe (non Nikon body).
Compatible Camera list:
A: The EOS DSLR camera with external flash control menu:
Canon 5D Mark II, 5D Mark III, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 1000D 1100D.
B: The EOS DSLR Camera without external flash control manual:
Canon 5D 10D 20D 30D 300D 350D 1D 1D Mark II.
Compatible ETTL Flash: ( It suport wireless remote control through camera menu ).
Canon 600EX ( RT ), 580EX II, 430EX II, 320EX, 270EX II
Yongnuo YN-565EX C, YN-468 II C, YN-467 II C, YN-465 C (Yongnuo flash units don’t support HSS Function).
Note: 430EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters.
The compatible shutter cable list:
C1-60D / 70D / 400D Series / 500D series / 600D Series / 1000D Series
C3-40D / 50D / 7D / 1D Series / 5D series
System type: Digital FSK 2.4GHz wireless controller
Flash mode: E-TTL, manual flash
Sync mode: front-curtain sync, rear-curtain sync, hi-speed sync(auto FP)
Groups: 3 groups(A/B/C)
Sync speed: 1/8000s
Output: Hotshoe, PC port
Shutter release interface: 2.5mm shutter release interface
USB firmware upgraded: Support
AF assist beam emitter: Support
Applicable battery: 2 * AA battery(Support 1.2V rechargeable battery)(Batteries not included)
Standby time: 120 hours
Package size: 10.7 * 10.7 * 5cm / 4.2 * 4.2 * 2.0in
Package weight: 176g / 6.2oz
1 * Wireless Flash Controller
1 * C1 Shutter Cable
1 * C3 Shutter Cable
1 * User Manual（English & Chinese)
Questions & Answers
Will this control power for the Canon Speedlite 430EX II Flash or must I still use the camera menu on my Canon 6D?
It absolutely works on the 430ex II. I have that flash with the 7D and this is a lot quicker than going through the menu. If your on the fence on buying this, I would strongly suggest it.
By Steven R. Heldenbrand on January 20, 2018
I have a canon 6D. I’m trying to connect my 600EXRT Speedlite to this controller but they do not link. Do I still need a receiver for it?
My YN-622 doesnt work well on my 6D. I dont think they are completely compatible. Very depressing . However using two or more receivers works well but stuck manually controlling lights.
By gerianna on December 8, 2017
Will this work with a canon 60d and a 600ex-rt speedlight?
Yes it will but Why? the 600EX RT has a Radio in it controlled by the YN E3-RT Radio Transmitter the only thing you need. The YN 622 will work it but your going to have to put the YN 622 rx on the flash and the YN 622 TX on camera when all you needed is the YN E3-RT Radio Transmitter
By LRM Photos on June 3, 2017
Can i use the ss mode on my yn622c-tx and my yn565ex?
I’m not sure by itself, does it have a built-in receiver. I would check with the manufactures website. I know it well if you add the YN 620C receiver
By k macke SELLER on May 15, 2018
Would either version work with Panasonic cameras? I just need them for high speed sync. I don’t mind using them in manual mode.
Hello Yes should be compatible Thank you
By Shining Star Photo INC SELLER on May 14, 2018
I just bought the YN622C-TX and it doesn’t work with either of my Canon 5d Mark ii’s, but it works perfectly with my Canon T6i. What am I doing wrong?
they work great on both of my 5D ll but all three of my flash are HSS I do not know what your using as for Flashs and with that said you really do not need the TX you can set it all from the back of your 5d menu maybe you need to set it there first
By LRM Photos on May 13, 2018
I have a canon 430 ex iii rt. do i need a receiver for it?
Yes, you will need a receiver for it.
By Pieter Roelofse on May 13, 2018
Update: the YN622C will not fire remotely on any of my 5D Mark ii’s or my T6i. The test button fires them but nothing else. Help!
Sounds like it should work. Make sure you have all channel and group settings correct. I use 6d and works great
By D. Kamminga on May 12, 2018
Does anyone know if this trigger works on a Sony a7?
By Jerry H. on May 12, 2018